그냥 dmesg | grep eth0 해서 확인
eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 186, node addr 3cd92b0942d0
bonding: bond0: Adding slave eth0.
bnx2: eth0: using MSI
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
'UNIX > Redhat' 카테고리의 다른 글
[스크랩] 커널 파라미터 값 변경 (0) | 2014.02.12 |
---|---|
ssh 접속 불가 문제 ( ssh_exchange_identification: Connection closed by remote host ) (0) | 2014.02.07 |
[스크랩] 네트워크 bandwidth 제한 - ethtool , tc (0) | 2014.01.07 |
[스크랩] 네트워크 Bandwidth 측정 (iperf, jperf) (0) | 2014.01.07 |
[스크랩] 네트워크 속도체크 (iperf - network bandwidth check 옵션) (0) | 2014.01.07 |